Ashly nXp754 Усилитель мощности, 4х75 Вт, DSP Protea

296 600₽

Наличие и цену товара уточняйте у менеджера

0 отзывов

Код товара:

19230

Производитель:

Ashly

Весь представленный на сайте товар изготовлен заявленной компанией-производителем и поставляется в Россию официальным дистрибьютором а значит обеспечен гарантийным обслуживанием от авторизованного сервисного центра.

Ashly nXp754 - Усилитель мощности, 4х75 Вт, DSP Protea.

Характеристики:

Amplifier

Number of Channels	4
Output Power	75 W @ 2, 4, and 8 Ohms
Dimensions (W x H x D)	19 x 1.75 x 14.54" (48.3 x 44.5 x 36.9 cm)
Weight	12 lb (5.4 kg)

Protea DSP

Input Source	Protea DSP Options: Analog, auto (net, AES3, analog)
Limiter	Brick Wall Limiter Threshold: -20 to 20 dBu Ratio: Infinite Attack: 0.2 to 50 ms/dB Release: 5 to 1000 ms/dB
Compressor	Threshold: -20 to +20 dBu Ratio: 1.2:1 to infinite Attack: 0.2 to 50 ms Release 5 to 1000 ms/dB Detector: Peak/Average Attenuation Bus: 2 available Metering: In, Out, Attenuation, Graphical
Controls	Autoleveler Controls Target Level: -40 to +20 dBu Action: Gentle, Normal, Aggressive, User-Defined Maximum Gain: 0 to +22 dB Metering: Input, Gain, Attenuation Ratio: 1.2:1 to 10:1 Threshold Below Target: -30 to 0 dB Gain Increase/Decrease Rate: 5 to 1000 ms/dB Hold Time: 0 to 6 sec
Ambient Noise Compensation	Output only Max Gain: -20 to +20 dB Min/Base Gain: -40 to +20 dB Gain Change Rate: 0.2 to 20 s/dB Link Group: 16 available ANC Input Channel: 1 to 2 or 1 to 4 Noise Threshold -40 to +20 dBu Program/Ambient Gain Ratio; 0.3:1 to 3:1 Metering: Input level, Attenuation, Average noise
Ducking	High/Low Priority, Trigger, Filibuster, Ducked Program Trigger Threshold: -80 to +20 dBu Ducking Release: 5 to 1000 ms/dB Ducking Depth: 0 to -30 dB, -∞ Enable ducking at matrix mixer Metering input
Gate	Threshold: -80 to +20 dBu Range: Off, 100 to 0 dB Attack: 0.2 to 50 ms/dB Release: 5 to 1000 ms/dB Metering: Key signal, gate LED, graphical Advanced Gate Controls Key engage enable Key Frequency: 20 Hz to 20 kHz Key Bandwidth: 0.016 to 3.995 octave
Gain	Gain (with / without VCA): -50 to 12 dB, off, polarity invert Digital VCA Groups: 4 available Remote RD8C Gain: Enable per channel, 0 dB to -∞ WR-5 (neWR-5) Remote Gain: 0 to -50 dB, mute
EQ Type	For FIR Filter Output only, 48 kHz only, 2-384 taps File Type:.csv,.fir For 31-Band Filter Type: Constant Q or proportional Bandwidth: 0.499 octave to 0.25 octave For Parametric 2,4,6, or 10 Band Frequency: 20 to 20 kHz Level: -30 to 15 dB Q Value: 92.436 to 0.267 For Hi / Low Shelf 6 / 12 dB/octave Frequency: 20 Hz to 20 kHz Level: -15 to 15 dB For All Pass Frequency: 20 Hz to 20 kHz For Variable Q HP / LP Frequency: 20 Hz to 20 kHz Q Value: 3.047 to 0.267 For Notch / Bandpass Frequency: 20 Hz to 20 kHz Q Value: 92.436 to 0.267
Feedback	48 kHz Sampling Rate 12 x filters In/Out per filter Lock (per filter) and global lock Filter Modes: Float, restricted, manual Filter Type: Notch, parametric Filter Frequency Range: 20 Hz to 20 kHz Notch Filter: -∞ Parametric Filter: 15 to -30 dB Filter Bandwidth 0.016 to 3.995 Octave Detector Sensitivity: 5 levels Float Time 5 minutes to 24 hours
Crossover	2 Way, 3 Way, 4 Way Crossover & High Pass / Low Pass Filters Bessel & Butterworth Filters: 12 / 18 / 24 / 48 dB/octave Linkwitz-Riley Filter: 12 / 24 / 48 dB / octave Frequency: Off, 20 Hz to 20 kHz
Delay	At 48 kHz Sampling Rate (Input Time, Distance & Temperature): Speaker Delay: 0 to 21 ms Delay: 0 to 682 ms At 96 kHz Sampling Rate (Input Time, Distance & Temperature): Speaker Delay: 0 to 10.6 ms Delay: 0 to 341 ms
Audio Metering	Range: -60 to 20 dBu Increments: 1 dB Peak Hold Indicator
Signal Generator	Pink Noise, White Noise, Sine Wave Signal Level: Off, -50 to 20 dBu Sine Wave Frequency: 20 Hz to 12 kHz
Mixer	Matrix Mixer: Gain (0.5 dB Increments): Off, -50 to 12 dB Mute: Per channel Auto-Mixer Enabled: Per channel Global Auto-mixer Response: 0.01 to 2 sec Enable Ducking at Mixer Ducking LED: Per channel if enabled Metering: Level, auto-mixer level
Processor	Input A/D, Output D/A: 24 bit DSP Processors: 32-bit floating point Sample Rates: 48 kHz, 96 kHz Propagation Delay @ 48 kHz: 1.42 ms Propagation Delay @ 96 kHz: 0.71 ms